Conveniently, yet well? The EUFAB bicycle repair stand would make exactly the test. For just 50 euros, at first glance very solid repair stand comes home. But where the resulting huge price difference to professional models like the Feedback Sports Pro Elite ? This question and whether an acquisition will be profitable to go in the following review in detail to the bottom.

 

The EUFAB repair stand Profi

the company EUFAB is known primarily for its excellent and award-winning bike rack for the car. In this segment, stability and quality is absolute must. The step auto fasteners to fixtures in the home workshop is therefore not very far-fetched.

Just as with the bicycle racks of EUFAB Professional is very easy to deploy in a few steps and cleaned up just as quickly in the corner space gently. So it is easy to carry him on a trip in the car.

The supplied steering lock does its job well properly and can be fixed between saddle and handlebar using rubber bands. Such a turn of the handle is no longer possible to one side.

Incidentally noticed is the professional EUFAB one of the best-selling bike repair stand throughout Germany. It all seems to speak for ours. Whether the stability, processing and functionality in a practical test also convinced us, there is then read.

Stability and processing

7kg weight is a lot for a repair stand. Of course this is to convey not ideal, but usually testifies of stability and good materials. The stability is also always given to the four far-reaching legs. Pretty much any power-consuming maintenance work can be performed safely.

The powder-coated metal components, and the sturdy plastic parts give a good feeling. Overall, something much plastic is used, but because of the price has already been determined in advance. The payload of about 30kg is also fine. Usually normal bicycles weigh no more than 20kg and also e-bikes below largely the 30kg mark. Who but mostly works with e-bikes should rather focus on a slightly more sustainable model.

functionality

To adjust and set up the EUFAB professional, there are relatively many ways. Whether it comes to the working height, the clamping width, or the rotation. Almost any desired settings are accessible. This alone proves the tremendous adjustment of the telescopic rod of up to 1.90 m height. The clamping of the bicycle can be smoothly accomplished via a bracket for receiving the bicycle frame. Here is set via a clamping lever the pipe diameter (25-40 mm) and fixed. The clip itself is in turn made of plastic. Here we would have liked a little more stable. but could find no problems until test completion. Whether this is but also works in a very long time still turn out.

What we also found negative was the horizontal pipe or the locking screw. This can not be fixed so strong for heavier bikes that a bike is constant in the desired position. Depending on the weight distribution or position of the frame clip is after the bike of gravity. For normal maintenance and repair operations of course this is not essential for survival. Nevertheless, of course, strike the inner perfectionist when the bike is not so, as you would like it.

In addition to this somewhat unsightly property, the EUFAB Professional comes standard with a tool holder. This is equipped with a magnet to the falling-out of screws or larger tool such as to prevent wrench. One way we found very thoughtful investment.

 

 

Total score:

The EUFAB pro had a tough challenge with this budget-mounting stand. To wide cheaper than ordinary bicycle repair stand but attracted but also some weaknesses with it. The choice of materials can be easily traced and does not appear in our eyes also serious. However, the yielding locking clip is not a small blemish. Of course, for the occasional passage adjusting or working with a chain cleaner  absolutely feasible and also every amateur cyclists should be made absolutely satisfied. If you see yourself as something professional, one should resort to an alternative. To this end, one must also take some extra cash in hand.In summary: for brief maintenance, which you do not want to perform on the floor, the EUFAB Professional offers a very successful and particularly inexpensive model. Who does not interfere with a slight shift of the bicycle in the bracket, is a lot of fun with this bike have work stand.

 

Feedback would provide a suitable stand that quality, functionality and a good price combines the collection in any hobby shop. Whether this is difficult with the 140-euro Feedback Sport Mechanic, or whether it is perhaps more useful to resort to alternatives we will clarify in this test. The fact is, the little brother of Feedback Sports Pro Elite appears like absolutely the top model, although the first difference begins with the lifting capacity of 29.5 Kg and is therefore 9 Kg less resilient. But this is still sufficient for the most common bikes and even electric bikes. Whether the rest also with less comes up we wanted himself determined to find out.

The Feedback Sport Mechanic

Who in his hobby workshop not always want to repair the bicycle on the ground, or will protect his back should definitely resort to a work stand. With Feedback Sport Mechanic dissolving, at least when it comes to the manufacturer, this issue. Not only that the bicycle is raised, better yet, the Feedback Sport Mechanic can be individually adjusted to suit the size of each person.

Of course, most manufacturers promise a lot, but in reality, unfortunately, this often looks different. This could not confirm the Feedback Sport Mechanic. Added to this is the lightweight construction which can be accomplished in seconds. These are the most striking features, which you can get the first impression. Whether you the Feedback Sport Mechanic simply want to store only in the garage, or directly packed into the car to him always to have it, both are possible without any problems. When folded, the assembly stand is the proud dimensions of 16.8 x 12.7 x 112 cm. Built and combined will of Feedback Sport Mechanic very simple three rotating handles that can easily tighten up by hand or can be solved.

Stability by three feet

Particularly noteworthy is the really incredible stability in the state. Here, all testers agreed the Feedback Sport Mechanic is really always optimally and securely. In addition, the excellent processing of steel and aluminum for a secure feeling and the durability of the model provides.The weight of 5.7 kg makes a very good balance between stability and lightness. The setting for the working height and the work area leave nothing to be desired. Wedged with the safe rotary-Lock clamping system is at a height of 1.0 m to 1.65 m.Whether the bike is then stabilized as normal or at an angle, is completely left to the free use. However, we noticed that the bike gladly again gives way to gravity when the thumbscrews were not bomb tightened. Here it is even worse that the set screws are made of plastic and thus might even break off excessive force. A snap adjustment would fit better here definitely. With the free-running wheels and adjusting the circuit and the use of is chain cleaners  greatly facilitated.In every situation the Feedback Sport Mechanic was a reliable helper, especially by the ease of use were all settings intuitively perform.

As another positive point can be highlighted the fair price. For comparable repair stand, which offer the same stability and quality, settling mostly in the range above 200 euros. In semi-professional area the Feedback Sport Mechanic commutes to the mid to low segment.

Accessories for simple work

The Feedback Sport Mechanic is delivered without accessories. Nevertheless, there are many other components to extend the mounting stand. Most buying accessories for a matching of the feedback tool holder , which is mounted directly on the shaft. It offers enough space for your whole smaller tool, which would otherwise lie on the floor. Whether impus, spray or small parts such as valve caps or screws. In the made of massive plastic holder all find enough space and is available for work immediately. The price is just over 20 Euro slightly upscale. When working, it is a support and should definitely be ordered.

Secondly, nor has the Sports Flop Stop Handlebar holder to. This allows you to fix the handlebar during the repair. Thus the constant enfällt back and forth shaking the front wheel. Especially when working the wheel you appreciate this accessory. The handlebar bracket is sandwiched between saddle and handlebars and can be adjusted by the length as desired. This tool is available for available for less than 20 euros.

 

 

Total score:

The Feedback Sport Mechanic a bad buy is definitely excluded. Minor problems, such as the yield at the oblique position of the bike and the plastic coverings on the thumb screws are present, but not tarnish the positive overall impression.Absolute stability and the compact and transportable structure make the Feedback Sport Mechanic for rounder among bicycle repair stands. The nutzvolle accessory costs together again, although about 40 euros more, but in our opinion is essential and justifiable.

Overall, we can give a clear buy recommendation for the Feedback Sport Mechanic and guarantee that your money is really well spent. All in all a safe and high quality repair stand that can safely recommend.

 

In this test, it is about the Powerfix bike — Motorcycle stand substantially more favorable model for independent bicycle maintenance — and repair at home. Whether this variation for about 65 € with the class — can compete models, such as the Feedback Sports Pro Elite, is examined in detail below.

The Powerfix Bike Repair Stand

As in our other tests should be a good bike — repair stand above all fulfill the following central characteristics: it should allow convenient, comfortable and work your back, should be fully adjustable in height and can be adapted to a wide variety of bicycles.

It should also have a high stability, so that the assembly stand is stable also on bicycles with a higher weight and does not slip. The Powerfix mounting stand meets these characteristics, despite the relatively low price surprisingly good, that is, that one for just under 65 € a grassroots assembly stand

Stability and processing

The Powerfix mounting stand weighs 8kg and has a maximum payload of about 30kg, which means that he is strong enough to support all popular types of bicycle stable.

However, when it to special requests, such as very heavy electric — bikes goes, you may need to repair stand recourse whose carrying capacity is higher than 30kg. If, however, within the 30kg — is limit the Powerfix remains stable and are without slipping on the floor. This is guaranteed by its 4 pillars which are even suitable for request for screwing on the floor.

The Powerfix mounting stand consists mainly of steel and aluminum, which with proper care a long, satisfactory use guaranteed. Visually, this mounting stand can quite impressive: the combination of silver, black and blue looks in our opinion, very chic.

functionality

The Powerfix mounting stand comes pre-mounted at home, it only need a few parts are screwed together, which is no problem. In use, the device is constructed with the aid of a quick release in an instant and can be folded to save space after use if necessary. This mounting stand also enables time-efficient work, since the stand does not have to be rebuilt every time.

The bike is by means of a quick — clamped system, which is covered with a paint-friendly and non-slip profiling. The Clamping claw is suitable for bikes whose frame 25mm — 40mm is thick. This corresponds to all common types of bikes, but could for more specialized bicycles such as racing bikes or electric — prepare bicycles problems. In height, this mounting stand of about 107cm — 188cm be adjusted continuously, so what leaves no wish unfulfilled. During our tests the Powerfix Repair Stand remained at any altitude and at any load up to 30kg very stable and not slipped.

Also included in this case a link fixing, which can be used if necessary to prevent unwanted and disturbing movements of the front wheel during repair. In addition, you can the supplied tool tray attaches to the main tube of the stand with integrated magnetic tray, which has proved to be extremely useful during repairs.

 

 

Total score:

The Powerfix mounting stand convinces by easy handling, high functionality and extremely good price — performance ratio. The device is up a few steps and dismantled and can be cleaned up to save space after use.During our tests, the unit was 100% stable at all times and slipped not, enabling a secure and convenient repair and maintenance. The provided link fixing and the tool tray with integrated magnetic tray prove especially during lengthy applications very useful.So if for little money a good bike — repair stand searches, is well served with Powerfix stands and will be very pleased with this unit.

 

When it comes to «do — it — yourself» — is repairing the beloved bicycle, to get as good as not buying a professional bike mounting stand by.The «Feedback Sports Pro Elite», one of the top line of the mounting studs should be checked in this test paces.

The Feedback Sports Pro Elite

A very good bike repair stand should have three main characteristics: First, you should be able to work comfortably, convenient and especially easy on the back by his help. Secondly, it should be suitable for all types of bikes and freely set in the working height. Third, the bike should work stand rock solid and stable in any position to 100%, regardless of whether is now working on a 20kg bike with a child seat or on a 5kg lightweight carbon bike.

To anticipate: The Feedback Sports Pro Elite for meeting these requirements are guaranteed 100%. For just under 230 € you get a bike repair stand, which holds, what it promises.

Who a bit more money in a Feedback Sports Pro Elite — is invested stand many years after nothing else to look around and be very satisfied. Read on to find out in detail why.

Stability and processing

With 5.7kg weight 38,6kg maximum loading capacity , the Feedback Sports Pro Elite is a real powerhouse. In this case, the standing on three feet repair stand moved even after several hours repair work not centimeters. However, he convinced not only by extreme stability (other bicycle repair stand, which we tested, would be at a weight of just 40kg already adopted), but also by very good and visually sophisticated finish: Since the Feedback Sports Pro Elite is made of aluminum he is ideally suited for the long-term continuous use.

A little gem on top: Visually makes this work stand a very good figure: the red — anodized appearance looks very noble and quite a bit better, as already in the photos.

functionality

Probably the biggest advantage in the area of functionality, is the easy handlingof this bike mounting stand. The Feedback Sports Pro Elite comes completely assembled and ready to use out of the package, guarantees time-efficient work and provides other bicycle repair stand, which must be re-assembled prior to each use and their parts are untraceable scattered in the garage without problems in the shade.Another highlight of the Feedback Sports Pro Elite is the smart and easy quick — chucking — mechanics ( «Secure-Lock clamp device»): Simply the bicycle frame to pinch, push and possibly minimal fine-tuning to the designated wheel. With a clamping diameter of 19mm — 66mm also the most expensive road bikes and exotic ladies wheels with thick frames is not a problem for the Feedback Sports Pro Elite.

Also, with a clamping height of 1060mm — 1800mm probably the garage ceiling the biggest obstacle when it comes to working comfort. It should be again emphasized that the Feedback Sports Pro Elite safe and stable at every time, whether in 35kg heavy bikes on 1.80m height or 5kg lightweight racing wheels to 1.50m height.

 

 

Total score:

The Feedback Sports Pro Elite is a bicycle repair stand, which holds what others only promise. He is not only a real powerhouse with a capacity of up to 38,6kg and is at any time of the repair also incredibly stable, but still looks very good. With a clamping height of up to 1.80 m and a clamping range of up to 66mm, he leaves no wish unfulfilled and adapts to the bike and also the people at any time easily. The easy handling of this mounting stand impresses in every detail. This is rounded off by a high-quality processing of aluminum, which guarantees a long-term, long-term use.So who is looking for the ideal bike repair stand and is also willing to increase capital expenditure somewhat in an absolutely high-quality top-class model, is guaranteed well served with the Feedback Sports Pro Elite and always be satisfied.

 

Even if not much screwed on his bike, one should nevertheless be cleaned and oiled regularly. At least every almost one hundred kilometers should be cleaned and oiled the chain. If you often off the road moves even more common. This necessary work is much more pleasant and easier with a bicycle repair stand. The Park Tool PCS-9 is already missed by myself in action and I do not want him for 2 years.

Park Tool PCS-9 repair stand the test report

Park Tool PCS-9 repair stand is probably one of the best bike accessories that you can buy. In the long run it will even save money.Park Tool itself describes the PCS-9 as Einstigs-repair stand for ambitious hobbyists. But why do I need it? Whenever I return from a tour — usually in the dirt — I clamp the corresponding bike in the stand and will clean it rough from dirt. Then I check the tires to any cracks or other damage, such as metal chips. Total takes me this procedure with the Park Tool PCS-9 just a few minutes to complete. Before I had the luxury of a repair stand, I turned like a lot of my bike to simple and so tried the work carried out. I have to I do not point out that it is not only exhausting to work so, but not as perfect as you can not reach so good at many places. Park Tool PCS-9 it is contrary Easily Bicycle accurately adjust to the appropriate angle that is needed.

The Park Tool Repair Stand can be variably adjusted to a working height of 99cm to 145 cm and the padded clamp handle almost pipes of a diameter of between 24mm and 76mm. When folded, the dimensions are very space-saving with  30.5 x 12.7 x 73.7 cm and a weight of 6 KG. Assembling goes relatively quickly and is also very convenient to carry out minor maintenance on lines or more day trips. I have my PCS-9, however, so far only 2 times broken down when I rearranged my workshop.

Load bearing the Park Tool PCS-9 is all. I had already pretty much chucked each bike. From lightweight like Alutec Teibun to heavy e-bikes with 26 KG and very unequal weight distribution. All bikes can be clamped without problems and also fixed in any position thanks to the 360-degree swivel clamp handle. Especially the distance between standpipe and pedals is a good size. This ensures that the function of the bicycle is always given. When setting the course an absolutely essential feature.

Park Tool PCS-9 repair stand is sold for about 150 euros, but you can find much cheaper online him. Here it costs as Amazon currently only about 115 euros .

Optional accessories like a toolbox is not in the standard version with included, which is a pity, because many competitors offer this.However, you can reorder it for little money.

 

Park Tool PCS-9 vs. PCS-10

Surely you milled you even if you might not the newer model PCS-10 should buy or what the pricing difference accounts for about 60 euros. Of course there are some innovations that do not bring the Park Tool PCS. 9 Here especially the quick clamping grip should be mentioned, with which one does not have to screw as long as the older model. Likewise, there are other tools such as truing, which can be mounted directly on the mounting stand. For my part I can say that these features are indeed very nice but would not be essential importance. Therefore, I find the higher price only partly justified and not necessary. However, anyone who has the extra budget it will have much easier, especially when pinching the bikes.

 

 

 

Total score:

Park Tool PCS-9 is certainly one of the best bike repair stand to there are to buy. Enormous stability and suitable for any bike. Add to this the good processing (each bearing part is made of metal, as well as the clamp handle).After years of using the repair stand is still as operational as the first day. The rubber coating on the clamp handle to show signs of wear. Additional accessories, although unfortunately only available at an extra cost, but for a good price in the middle segment, the all times reasonable.In short a very solid and practical helpers are obtained when buying a Park Tool PCS-9 for all maintenance and repair work on pretty much any bike. I also go strongly believe that I will have this the Park Tool Repair stand another year in my workshop.

Park Tool looks back on now for over 50 years long face, which began with a bicycle repair stand and until today represents a class customer satisfaction.

So far were Park Tool repair stand to be very reliable and good overall, but could be in relation to competitors generally do not settle.Whether Park Tool can create with the PCS-10, you will learn in the following test.

Construction and design — stable and secure

With an improved clamping grip which the Park Tool PRS-25 is very similar in handling to pretty much any frame or seat tube adjusts so keeping it very safe. The clamping can be very easily and in no time operate with the quick closure and only one hand. This is a really good improvement over the PCS-9 wherein the trapping of heavier bikes was often a burden.

The length of the clip is 87mm and is therefore somewhat longer, but should be able to hold all of the frames and pipes easily anyway.Possibly it is necessary slightly extend the seat tube further. Whether you want to vertically hoizontal or somewhere secure the bike in between, everything is with the Park Tool PCS-10 possible. The rotation creates ParkTool so smoothly, yet rock solid when you have reached the position, more than any other manufacturer.

Even when the total allowable carrying capacity of the mounting stand trumps all competitors. Satte 45 kilograms can be attached to the repair stand. As much as with any other model in the price range — and the whole still at a portable bicycle repair stand.

As with the PCS-9, the stand is constructed at the PCS-10 on three feet. Where the Weight focus is on the two Front. Thus, a stable and steady free installation is guaranteed — if you placed the assembly stand on a level surface. When mountain biking or downhill driving which is not always possible and one must be careful to balance or to store them at the two front legs, the weight (In a slope always down hinstelle).

Transportable with small drawbacks

The bike repair stand is fully adjustable with durable quick release levers. The height can be adjusted from 109cm up to a maximum of 152 cm. Even if one does not require additional tools for the folding, you can again save with the removal of the clamp handle slightly in size and so shrink the model to a manageable 104 cm.

The high stability is reflected in the net again. Whole 7.5 kg can go into the bone during frequent configuration.

With the optionally available accessories can transform the Park Tool PCS-10 in a small workshop. Whether toolbox, truing or simple towel rail — there are a number of useful extensions.

The most common question that we get to Park Tool PCS-10 is whether the additional feature to charge for Park Tool PCS-9 are justified. Considering that the price difference is not serious and the Lifetime warranty on both models is, the main difference is to be found at the clamp handle. Here the PCS-10 is clearly superior in terms of usability and processing.

 

Total score:

If the Park Tool PCS-10 the Feedback Sports somewhat inferior Elite Pro terrain and transportability, but he has enes perfect repair stand for your own hobby shop with great values, which pay from time to time and again.